Zemin destek ekipmanlarının çalışmasına giriş
The operation of the floor support equipment is briefly introduced. Zemin destek ekipmanının çalışması kısaca tanıtılmaktadır. The floor support equipment must first install the following steel beams and then lay the floor support plate on the steel beam. Zemin destek ekipmanı önce aşağıdaki çelik kirişleri takmalı ve daha sonra zemin destek plakasını çelik kirişin üzerine yerleştirmelidir. The contact between the floor support plate and the steel beam is generally anchored with anchors. Zemin destek plakası ve çelik kiriş arasındaki temas genellikle ankrajlarla tutturulur. As for welding: floor support The slab laying is connected with the steel beam, the end of the slab is penetrated by spot welding with the steel beam, the pierce and the steel beam are penetrated and welded in the middle, and the special clamping pliers are used to connect the floor between the floor plates. Kaynak için: zemin desteği Döşeme döşemesi çelik kirişe bağlanır, levhanın ucuna çelik kiriş ile nokta kaynağı ile nüfuz edilir, delici ve çelik kiriş ortaya nüfuz eder ve kaynaklanır ve özel sıkma pensesi zemini zemin plakaları arasında bağlamak için kullanılır.
The floor support board equipment must first install the following steel beams, and then lay the floor support board on the steel beam, and the contact part between the floor support board and the steel beam is generally anchored with anchors. Zemin destek panosu ekipmanı önce aşağıdaki çelik kirişleri takmalı ve daha sonra zemin destek panosunu çelik kiriş üzerine koymalıdır ve zemin destek panosu ile çelik kiriş arasındaki temas kısmı genellikle ankrajlarla tutturulmalıdır. As for welding: the floor support board is laid and connected with the steel beam, and the board end The penetration welding of the head and the steel beam, and the penetration welding of the peg and the steel beam in the middle, Kaynak için: zemin destek panosu çelik kiriş ve tahta ucu ile döşenir ve bağlanır.
The floor slabs are connected with special clamping pliers to engage the pressure holes, and the plugs are spot welded to the floor slabs and steel beams with special galvanized plugs. Zemin plakaları, basınç deliklerini tutturmak için özel sıkıştırma penseleri ile bağlanır ve tapalar, zemin plakalarına ve özel galvanizli tapalara sahip çelik kirişlere nokta kaynaklıdır. If it is an arc-shaped area, the special shape cutting of the floor slabs is cut by a plasma cutting machine , The incision is smooth, and the surface galvanized layer is complete. Ark şekilli bir alan ise, zemin plakalarının özel şekil kesimi bir plazma kesme makinesi tarafından kesilir, kesik pürüzsüzdür ve yüzey galvanizli tabakası tamamlanmıştır.
İlgili kişi: Mr. Arno Hao
Tel: +8618717894416