hakkında şirket haberleri Double layer roofing sheet roll forming machine tips

  In the process of the use of color steel tile press, tile press damage is inevitable, in order to make a lasting tile press, the use of first to clean the surface of the tile press, the machine upper die stamping process: by motor through the pulley, drive the input shaft and pinion, big gear, shaft drive, through a set of driving CAM mechanism with upper die slide up and down, realize the pressure.

  The rotation of the workbench is installed by the gear group at the end of the shaft, the transmission pin gear, the trapdoor wheel installed on the six square rotor shaft to achieve indexing positioning, on both ends of the shaft and installed on the same shaft and the pressing CAM conjugate back CAM, through the positioning rod and positioning disk to achieve the location of the lower die in the working position. In the left and right sides of the chassis, there is a lubricating pump installed, the machine works through, the oil pipe to the friction parts of the transmission of lubricating oil.